How To Enable Horn When Locking Car Hyundai, How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming, KevweAuto

How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming

Spread the love

Driving a Hyundai car offers peace of mind, Thanks to great reliability and an industry-leading warranty. But some drivers wish their Hyundai had just a bit more personality. If you want your Hyundai to beep its horn whenever you lock the doors with the key fob, it’s easy to program this feature. Enabling the horn beep on lock gives your Hyundai an extra touch of customization.

Table of Contents

Understanding Hyundai Horn Options

How To Enable Horn When Locking Car Hyundai, How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming, KevweAuto

Most modern Hyundais come equipped with a horn that sounds whenever the alarm is triggered. This works as a security measure to scare off potential thieves and alert the owner that something may be wrong. However, many drivers would also appreciate hearing a short horn beep just to confirm that their car is locked up tight.

This horn-on-lock feature is not enabled from the factory on most Hyundais. The good news is that it can easily be activated through a process known as programming. Programming allows you to customize certain settings and behaviors in your Hyundai’s computerized systems. Once you complete the programming routine, your Hyundai will beep the horn each time it is locked with the key fob.

Programming is done through your Hyundai’s Body Control Module, or BCM, which is essentially the main computer. You will need to put the BCM in a mode to accept new programming. Then, using a series of button presses on your key fob, you can input the proper code to enable the horn on lock.

Don’t worry, programming your Hyundai is simple! Just follow the step-by-step instructions for your specific model. This guide covers the process for recent models, including the Elantra, Sonata, Tucson, Santa Fe, Accent, Kona, Veloster, and more. With a few easy steps, you’ll have a horn beep confirming your Hyundai is locked up.

Programming Hyundai Models 2011-2016

How To Enable Horn When Locking Car Hyundai, How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming, KevweAuto

For most Hyundais built between 2011 and 2016, the programming process is straightforward. Start by unlocking your car with the key fob. Don’t open any doors yet. The next steps must be completed within 30 seconds.

  1. Insert the key into the ignition. Turn it to the ON position, then back to OFF.
  2. Remove the key and exit the car, keeping the driver’s door open. This allows you to access the interior switches while outside the car.
  3. Make sure all doors are closed except the driver’s door.
  4. On the driver’s door, locate the power door lock switch. Flip the switch to the Lock position 5 times within 10 seconds. On the 5th press, leave the switch in the down Lock position.
  5. After a few seconds, the car horn will beep three times. This confirms that you have entered programming mode.
  6. Within the next 5 seconds, press the Lock button on your key fob to enable horn on lock. The horn will beep once to confirm the new setting.
  7. Flip the door lock switch to the unlock position to exit programming mode. Your Hyundai is now programmed to beep the horn when locking!
READ ALSO  Fuel Gauge Stays On When Car Is Off - 5 Notable Causes For This

Testing it out is easy. Make sure the car is unlocked, then press the Lock button on your key fob. The horn should let out a short beep along with the normal locking behavior. One beep means programming was successful. Your Hyundai now has that extra bit of personality you wanted!

Programming 2017–2022 Hyundai Models

Hyundai updated the programming procedure for 2017 models and newer. The process follows a similar series of steps to put the car in programming mode. Then the horn beep on lock can be activated through button presses on the key fob.

Follow these steps to program your 2017 or newer Hyundai:

  1. Begin with the car unlocked. Open and close the driver’s door, then close any other open doors.
  2. Insert the key and turn it to the ON position. Quickly turn the key back to OFF.
  3. Remove the key. Make sure only the driver’s door remains open.
  4. On the driver’s door, toggle the power lock switch to the Lock position 5 times rapidly. Leave it in the down position on the fifth press.
  5. After a few seconds, the horn will sound three times to confirm you’ve entered programming mode.
  6. Within 5 seconds, press the Lock button on the key fob twice rapidly. This activates the horn on lock.
  7. The horn will beep once to confirm the setting change.
  8. Flip the door lock switch to unlock and exit programming mode.

Test it out by locking it with the key fob. One horn beep means you successfully programmed the feature! Enjoy having your Hyundai confirm that it’s locked up tight.

READ ALSO  Why Is My Car Overheating When I Turn My AC On?

Tips for Hyundai Horn Programming

How To Enable Horn When Locking Car Hyundai, How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming, KevweAuto

Programming your Hyundai for a horn beep on lock is easy with the step-by-step process. Keep these tips in mind for smooth sailing:

  • Work quickly through the steps once the driver’s door is open to ensure you enter programming mode within 30 seconds.
  • For 2011–2016 models, the Lock button on the door panel is used to enter the code. For 2017 and newer, use the key fob Lock button instead.
  • Only the driver’s door should be open when toggling the lock switch or pressing the fob.
  • You will hear 3 horn beeps to confirm that programming mode is active before entering the code.
  • Once the feature is enabled, one short horn beep means it was successful.
  • If the horn doesn’t beep or programming fails, wait 1-2 minutes before trying again.

Following the instructions precisely is important, since deviating from the steps can cancel the process. Don’t get discouraged if it takes more than one try – with a little practice, you’ll have it mastered quickly. Enjoy showing off your newly customized Hyundai!

Disabling Horn on Lock

If you ever wish to disable the horn beep, you can just repeat the programming routine. The process is the same to turn it off.

For 2011–2016 Hyundai’s, enter programming mode the same way. Then, on the 5th press of the lock switch, do NOT press the key fob. After the three horn beeps, just flip the switch back to unlock.

For 2017 and newer models, enter programming mode the same way. After the three confirmation beeps, do NOT press the fob Lock button twice. Just unlock the door to exit programming, and the feature will be disabled.

READ ALSO  How to Tell if Your Cold Start Switch is Bad? (5 Symptoms Of Failing Cold Switch)

Additional Programming Options

How To Enable Horn When Locking Car Hyundai, How To Enable Horn When Locking Car Hyundai: 6 Tips for Hyundai Horn Programming, KevweAuto

Beyond the horn beeping on lock, there are other settings that can be programmed on your Hyundai. For example, alarm system behaviors can be adjusted, like the duration of the alarm horn. Automatic locking and unlocking settings can also be customized to your preference.

Digging deeper into the programming menus allows for control over additional vehicle behaviors. However, further programming is considered an advanced process. Consulting a dealer service department or experienced auto technician is recommended before altering other systems. But for the horn beeping on lock, following the simple steps makes that one popular feature easy to enable yourself.

Conclusion

Part of the pleasure of owning a Hyundai is taking full advantage of its offerings. While out of the factory it lacks some customizable touches, a quick programming session gives your Hyundai that little extra personality you’re after.

Enabling horn beep on lock is one popular tweak. Following the straightforward programming routine, drivers can make their Hyundai honk when it locks up. This provides satisfying feedback that your car is secured. And it can help locate your Hyundai in a crowded parking lot.

Beyond security horn beeps, programming allows all kinds of customization. Disabling the seatbelt chime, keeping headlights on with the wipers, changing door lock behavior – the possibilities are endless! Tweaking these settings to your liking lets you really make your Hyundai your own.

Some Hyundai owners even use programming to access hidden menus and features that are disabled from the factory. With proper know-how, nearly every aspect of your Hyundai’s operation can be customized. Of course, digging deep into programming is best left to the professionals to avoid problems.

But for a simple yet satisfying mod like horn beep on lock, the short process can easily be done in your own driveway. Follow the step-by-step instructions to enjoy this popular feature that adds personality to your Hyundai. In no time you’ll have a car that confirms it’s locked up with a friendly beep. So take command of your Hyundai’s settings and explore just how versatile these vehicles can be.

Ejenakevwe Samuel

I'm Ejenakevwe Samuel, and my blog is all about sharing the love for cars. Through my blog, I pour my heart into educating fellow car enthusiasts in everything they need to know about their beloved rides. Whether it's driving tips, maintenance tricks, or the latest trends, I aim to empower others to make informed decisions and take care of their vehicles like a pro.

Leave a Reply