The Kia Oil Filter plays a crucial role in engine longevity, quietly filtering small particles from the oil to prevent premature wear. Selecting the correct Kia Oil Filter for your Kia model and changing it regularly is vital for proper lubrication. Understanding how to remove and replace the Kia oil filter enables you to handle this maintenance yourself and ensure a perfect fit.
This guide covers everything about Kia oil filters – from determining the right part number, to proper installation steps, to signs of when replacement is needed. With these insights, you can swap filters confidently and keep your engine safely lubricated.
Table of Contents
- Oil Filter Locations on Kia Vehicles
- Selecting the Right Kia Oil Filter
- How to Change a Kia Oil Filter
- Signs Your Oil Filter Needs Replacement
- Extending Oil Filter Lifespan
Oil Filter Locations on Kia Vehicles
Kia engines employ a full-flow oil filtration system with the filter positioned to receive all circulating oil. Typical locations include:
- Cartridge-Style – Most Kia 4-cylinder engines use a removable cylindrical canister filter positioned vertically near the front center of the engine.
- Spin-On Style – Most 6- and 8-cylinder Kia models employ a traditional horizontally-mounted spin-on filter that screws into the engine block.
- Under Vehicle – Some models mount the filter beneath on the subframe, requiring access from under the front.
- Next to Oil Pan – Rear-wheel drive vehicle engines often position the filter low on the side of the oil pan within the engine bay.
Consult your owner’s manual to find the specific oil filter position for your Kia. It’s often easily accessible once the vehicle is raised on jacks or driven onto ramps.
Selecting the Right Kia Oil Filter
Kia vehicles use oil filters specially designed for each engine. Choosing the proper part number ensures ideal fit and filtration performance. Here’s how to find the right one:
- Check Owner’s Manual – Your manual will list the factory oil filter part number needed for your engine. Cross-reference this when shopping for a new filter.
- Aftermarket Options – Brands like Fram, Mobil 1 and Wix offer less expensive aftermarket filters made to Kia’s specifications. Check packaging to match application.
- Genuine Kia Filters – Opt for an OEM Kia oil filter for a perfect fit and the confidence of the same part used at the factory.
Avoid generic one-size-fits-all filters. The wrong size or sealing gasket material can lead to oil leaks or decreased filtration. Stick with the manufacturer recommendation for best results.
How to Change a Kia Oil Filter
Once you’ve acquired the proper new filter, follow these steps for a quick and safe DIY oil filter replacement:
1. Prepare the Vehicle
Raise the front of the Kia and remove the underbelly splash shield if equipped. Have a drain pan ready to catch old oil. Wear eye protection.
2. Locate the Oil Filter
Clean around the oil filter area with a degreaser and find the specific filter used on your Kia’s engine using your manual.
3. Loosen the Old Filter
Place a filter wrench or channel locks on the old filter. Turn it counter clockwise to break the seal and loosen. Unscrew it by hand the rest of the way once loose.
4. Drain Oil from Housing
Allow all the trapped oil in the housing to drain out into the pan once the old filter is removed. This prevents spills when fitting the new one.
5. Prep New Filter’s Gasket
Lightly oil the sealing gasket on your new filter to allow it to seal tightly. Check that all old gasket material is cleaned from the engine housing.
6. Install New Filter
Hand tighten the new filter clockwise until the gasket contacts the mounting surface. Then tighten an additional 2/3 to 1 full turn to seal properly.
7. Refill Oil and Check for Leaks
Refill the engine with the specified quantity of new oil. Start the Kia and inspect closely for any filter leaks before lowering and test driving.
With the right tools and preparation, you can swap a Kia oil filter easily in under 30 minutes right at home. Just avoid over-tightening during installation to prevent filter or seal damage.
Signs Your Oil Filter Needs Replacement
Don’t wait until your next scheduled oil change to replace a worn filter. Watch for these signs that indicate reduced filtration and the need for a new filter:
- Leaking seams around the filter – Damage allowing unfiltered oil bypass
- Extremely dirty/black oil at changes – Filter is clogged and failing to trap contaminants
- Metallic particles in oil – Filter is allowing metal debris passage indicating wear
- Reduced oil pressure – Clogged filter restricting oil flow through the system
- Oil puddle under engine – External leakage past the filter’s gasket seal
- Over 100k miles on current filter – Excessive service life
Addressing a worn oil filter promptly preserves your Kia engine by keeping contaminants and sludge out of the oil supply.
Extending Oil Filter Lifespan
You can optimize oil filter change intervals and maximize usefulness by:
- Always using the exact filter specified for your Kia’s engine
- Choosing premium filters from reliable brands
- Using thicker, high-quality oil with better contaminant suspension
- Adhering to oil change intervals in your owner’s manual
- Avoiding low-quality bulk oil with more impurities
- Changing filter whenever oil is discolored or metallic particles are visible
- Swapping filter at least every other oil change or annually
quality oil and filters paired with attentive service habits provide the best oil filtration over the long run.
The humble oil filter has a huge impact on engine longevity. Equip your Kia with the proper oil filter, and replace it using careful installation practices. Watch for signs of reduced filtration capability indicating the need for a new filter. With the right parts and periodic replacement, your Kia engine will remain protected from excess wear.